The anchoring device SecuRope is a horizontal cable lifeline system that ensures 6kN as the maximum load on the worker in the event of a fall and 12 kN on the end anchors. The components withstand the forces without permanent deformation. The overhead and wall configuration ideally for industrial halls as the fall factor is reduced.
Glider AISI410 with steel carabiner for ground and also wall configuration. LDV11 is a captive glider
NEO Intermediate anchors AISI316 with energy absorbing device
Classic intermediate anchor AISI316 with energy absorbing device
EVO Intermediate anchor AISI316 without energy absorbing device, for rigid structures
End anchor with energy absorber for rigid structures
End anchor including energy absorber and turnbuckle
Trolley on bearings AISI304 (use only with safety block) for wall and ceiling configuration
Captive Glider AISI316 with steel carabiner (use only with lanyard) for wall and ceiling configuration
End anchor with energy absorber and dilatation device for fragile structures
Fall arrest Zip! AISI431 on inclined line 30°- 90°
Four way switch for intersection of SecuRope lifelines AISI304. Three way switch also available
Multipost AISI304 fitted with bituminous or PVC collar fixed with a set of four toggle bolts in zinc coated steel
Fixing assembly AISI304 for intermediate anchor on corrugated metal sheet roof and composite panels
Fixing assembly AISI304 for SecuRope lifeline on standing seam roof
SecuRope curve mounted on hot dip galvanized steel post (or AISI304) for fixing on concrete slab
SecuRope cold deck installation
SecuRope EN795:2012 tests
Life saved thanks to SecuRope lifeline
SecuRope St Gobain installation
SecuRope hot deck installation
SecuRope Duomo Pavia installation